Excavator flatbed truck supercharger maintenance tips super practical!

Feb 29, 2024 Leave a message

Asking is better than asking! Excavator flatbed truck supercharger maintenance tips super practical! The role of the supercharger is to increase the intake of the engine, so as to increase the power and torque of the engine, so that the excavator flatbed transport car can drive more vigorously. However, the working environment of the supercharger needs to have extremely high requirements for cooling, lubrication and dynamic balance, therefore, in order to avoid damage to the supercharger and extend the service life of the supercharger, it is necessary for the driver of the excavator flatbed carrier to operate correctly in use to achieve the purpose of maintenance and maintenance, and carry out daily maintenance of the excavator flatbed carrier supercharger through the following four aspects:


1, excavator flatbed trailer cold car must not go with the car

After the excavator flatbed trailer stops driving overnight, the oil will flow back to the oil pan because of gravity, and the oil cycle will be established after idling for about one minute after starting the engine, so that the floating bearing of the supercharger will be fully lubricated before starting to drive.


2. Do not immediately turn off the excavator flatbed trailer after high-speed operation

Excavator flatbed truck trailer supercharger in the working speed is very high, high-speed driving if immediately off, oil supply will suddenly interrupted, this time the supercharger is still rotating at high speed, so the oil in the floating bearing will soon be ground dry, floating bearings will be damaged. The correct approach should be to idle before turning off the engine ** less than one minute before turning off the engine.


3, small excavator flatbed trailer oil and filter can not be sloppy

The operating environment of the supercharged engine is relatively harsh, so the requirements for the oil are relatively high, and the viscosity and grade required by the manufacturer are used and replaced when selecting the oil. Filter element, not to mention, must use regular manufacturers of products, if the use of inferior filter element, will cause damage to the floating bearing of the supercharger, serious will lead to rotor lock, supercharger scrap.